Demulsifier Premium
Emulsion Breaker to treat light, medium and heavy crude
Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water.
Key details
| Generic name | Emulsion Breaker to treat light, medium and heavy crude |
|---|---|
| Active matter (%) | 90-93 |
| Standard packing | 210.00 Ltr. |
| Available pack sizes | Demulsifier is available in 25, 50, 210, 1000 Ltr IBC tank available at Fujairah, Dubai, Sharjah, Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam. |
| Supply locations | Demulsifier bases can be used to treat light, medium and heavy crudes manufacturer, Exporter and supplier in India - Middle East, Oman, Canada. Popular Demulsifier supplier in Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Muscat Sohar Barka Oman, Canada, Kenya, Africa, Uganda, Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai Ennore, Kolkata Haldia Paradip Question : What is Difference Between Demulsifier and Reverse Demulsifier? Answer : Reverse Demulsifiers—-Break oil-in-water emulsions Demulsifiers—-Break water-in-oil emulsions |
Need this product at your port or plant?
Enquire Now85
Dose recommendations have to be made on a case-by-case basis. The dosage of RXSOL DEMULSIFIER prescribed to break a particular emulsion varies from as little as 1 ltr per 20,000 Ltrs (50 ppm) of oil to as much as 1 Ltr per 10,000 ltrs (100 ppm) of oil. A few companies have even found that 20 ppm was more effective than the higher dosages, so we suggest adding the lower levels to your laboratory bench tests to verify the correct dosage for the specific application. Finding the most cost-effective dosage, as well as determining the best conditions of temperature, slow mixing, settling time, etc., is best done in the laboratory, using a sample of the actual oil or waste and a sample of Demulsifier.
Physical Data:
| Physical appearance | Clear free flowing brown colour homogeneous liquid |
| Active Ingredient | More then 40 Percent |
| Specific Gravity @ 25° C | 0.92 ± 0.02 |
| Viscosity @ 25° C | < 30 cps [cst] |
| Pour Point | < 0° C |
| ph range | 5.0 – 8.0 |
| Solubility in Hydrocarbons | Soluble |
| Solubility in water | Insoluble |
| Flash point ° C | >60° C |
| Shelf Life | Minimum two years |
| Packing | 210 Ltrs. |
| Storage Condition | -15 to 55 Degree C |
Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water
Specifications Demulsifies
Coulour yellow to brown
PH ( concentrated product 5 to 7
Melting / freeze point < -30 c
Flash point at 38 c > 40 c
Density ( 0.90 to 0.96)
Pour point = -15 c
Viscosity = 15 to 60 cst of 40
Futrue and Benefit :
Contains surface-active materials
Separates water from oil
Free from defilements
Excellent stability
Precise chemical composition
Easy to Handle.
Storage and Handling :
RXSOL DEMULSIFIER shall be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be handled with dry absorbent like sand, sawdust, etc. On ingestion / eye contact with the product, medical attention should be sought immediately.
Related products
Product FAQs
From our blog
Need Demulsifier Premium for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote