Oily deposits in steam boilers are a result of oil contamination of the feed water. Most often, the source of the oil is some part of the condensate and return system.
Fuel oil and cargo oils may contaminate the condensate via leaks in the oil heaters or tank heating coils. Lubricating oils may be picked up from steam driven machinery.
Oil deposits can be removed from boilers, L.P. steam generators, etc., by circulating a 2-5% solution of Heavy Duty Cleaner (Emulsifier) through the equipment. Heavy Duty Cleaner (Emulsifier) should never be used as an on-line cleaner. All cleaning should be done off-line.
For maximum cleaning efficiency, the cleaning mixture should be heated to 50° - 60°C (122° - 140° F) and maintained at this temperature during the cleaning operation. If adequate heat is not available, effective cleaning can be accomplished at temperatures as low as 25° C (77° F) using additional time. Carbonized oil or coke may require a two-step cleaning process using FOTTM fuel oil treatment followed by Heavy Duty Cleaner.
Heavy Duty Cleaner available in 25 Ltrs packing. And we are most popular Heavy Duty Cleaner manufacturer and supplier in Mumbai, Fujairah, Muscat, Kolkata, Visakhapatnam, Chennai, Ennore, Haldia, Gandhidham
Email : mail@rxmarine.com
Applicable Formulations & Products
.jpg)
Need Formulation Guidance?
Our marine chemists and supercargo inspectors are on standby to advise on product dosage, cargo changeovers, and water treatment logsheets.
- Support: +91 80699 76670
- WhatsApp: +91 87529 16666
- Email: rxmarinechemical@gmail.com
Rapid Port Readiness
Direct berth, anchorage & dry-dock delivery within 2 to 4 hours across major hubs: