Metalic Brightner Eco Rust Clean
Rust Stain Cleaner
Specially designed for removal of rust from any steel surface area and rust stains from brass, copper, stainless steel, aluminum, wood and ceramic surfaces. Also acts as a surface brightener.
Key details
| Generic name | Rust Stain Cleaner |
|---|---|
| Active matter (%) | 78-82 |
| Standard packing | 210.00 Ltr. |
| Available pack sizes | Metal Rust Stain Cleaner available in 1 Ltr, 5, 25, 50, 210 Ltrs packing. Uses of Metal Rust Cleaning detergent and chemicals not only save time and manpower but also helps to maintain metal finishes, As manual rust cleaning damaging the metal surface finishes. |
| Supply locations | Metalic Brightner Eco Rust Cleaner and Rust Remover manufacturer and supplier in Mumbai, Kandla Gandhidham, Chennai, Ennore, Visakhapatnam, Gangavaram, Surat Hazira, Kolkata Haldia Paradip, Fujairah, Dubai, Abudhabi, Ajmanm Sharjah, Muscat Oman UAE Middle East, Canada BC |
Need this product at your port or plant?
Enquire Now<p style="text-align: justify;">
<span style="color: rgb(0, 0, 0);">For steel surfaces remove oil, grease and old paint. Wet down entire surface with neat </span>Metalic Brightner Eco Rust Clean<span style="color: rgb(0, 0, 0);"> and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the </span>Metalic Brightner Eco Rust Clean<span style="color: rgb(0, 0, 0);"> is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.<br />
<br />
For removal of rust stains on painted surfaces and wood, </span>Metalic Brightner Eco Rust Clean<span style="color: rgb(0, 0, 0);"> should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.</span></p>
<p style="text-align: justify;">
It should be applied in full concentrated for heavy stains, or diluted with 20-50% with fresh water for light strains.<br />
<span style="text-align: justify; color: rgb(0, 0, 0);">•</span><span style="text-align: justify;">RXSOL-20-2054-210</span><span style="text-align: justify; color: rgb(0, 0, 0);"><strong> </strong>is highly concentrate<br />
•Dilute in water (always use plastic jar and<span style="font-size: 14px;"> </span></span><span style="text-align: justify;">RXSOL-20-1011-MB</span><span style="text-align: justify; color: rgb(0, 0, 0);"><strong> </strong>should be added towater never add water to </span><span style="text-align: justify;">RXSOL-20-2054-210 </span><span style="text-align: justify; color: rgb(0, 0, 0);">)<br />
•Surface should be sound clean and free from oil, grease, dirt etc.<br />
•Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)</span><br />
<strong style="color: rgb(0, 0, 0); text-align: justify;">Spraying Direction:</strong><span style="color: rgb(0, 0, 0); text-align: justify;"> Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metal Clean Bright RXSOL This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metal Clean Bright Rx will show up in a Wall Wash.</span><br style="color: rgb(0, 0, 0); text-align: justify;" />
<br style="color: rgb(0, 0, 0); text-align: justify;" />
<span style="color: rgb(0, 0, 0); text-align: justify;">Injection – Not suitable.</span><br style="color: rgb(0, 0, 0); text-align: justify;" />
<br style="color: rgb(0, 0, 0); text-align: justify;" />
<strong style="color: rgb(0, 0, 0); text-align: justify;">Re-circulation:</strong><span style="color: rgb(0, 0, 0); text-align: justify;"> When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.</span><br style="color: rgb(0, 0, 0); text-align: justify;" />
<br style="color: rgb(0, 0, 0); text-align: justify;" />
<span style="color: rgb(0, 0, 0); text-align: justify;">*If the mixture is allowed to overheat, it will soften epoxy / phenolic coating.*</span><br style="color: rgb(0, 0, 0); text-align: justify;" />
<span style="color: rgb(0, 0, 0); text-align: justify;">Use a strainer at the pumpstack when circulating any solution. Tank Lining–Stainless / Epoxy, Phenolic</span></p>
<p style="text-align: justify;">
<span style="color: rgb(0, 0, 0);"><strong>Product Properties:</strong></span></p>
<table border="0" cellpadding="1" cellspacing="1" style="width: 602px; height: 138px;">
<tbody>
<tr>
<td>
<span style="color: rgb(0, 0, 0);">Appearance</span></td>
<td>
<span style="color: rgb(0, 0, 0);">Colourless liquid</span></td>
<td>
</td>
</tr>
<tr>
<td>
<span style="color: rgb(0, 0, 0);">Density</span></td>
<td>
<span style="color: rgb(0, 0, 0);">g/cm3 at 15°C: 1.2</span></td>
<td>
</td>
</tr>
<tr>
<td>
<span style="color: rgb(0, 0, 0);">pH</span></td>
<td>
<span style="color: rgb(0, 0, 0);">10% solution 1.5-2.5</span></td>
<td>
</td>
</tr>
<tr>
<td>
<span style="color: rgb(0, 0, 0);">Compatibility:Metal</span></td>
<td>
<span style="color: rgb(0, 0, 0);">Concentrate and long touch may corrode.</span></td>
<td>
</td>
</tr>
<tr>
<td>
<span style="color: rgb(0, 0, 0);">Rubber</span></td>
<td>
<span style="color: rgb(0, 0, 0);">No known effect</span></td>
<td>
</td>
</tr>
<tr>
<td>
<span style="color: rgb(0, 0, 0);">Packaging </span></td>
<td>
<span style="color: rgb(0, 0, 0);">Order No:</span> RXSOL-20-2054-210<span style="color: rgb(0, 0, 0);"><strong> </strong></span></td>
<td>
<span style="color: rgb(0, 0, 0);">Size (in litres) 25 , 35 </span></td>
</tr>
</tbody>
</table>
<p>
<span style="color: rgb(0, 0, 0);"><strong>Characteristics:</strong><br />
• Non-flammable.</span><br />
<span style="color: rgb(0, 0, 0);">• Non-flammable.</span><br />
<span style="color: rgb(0, 0, 0);">• Economical,cost effsctive.</span><br />
<span style="color: rgb(0, 0, 0);">• Surface brightening</span><br />
<span style="color: rgb(0, 0, 0);">• Protects </span><span style="color: rgb(0, 0, 0);">and maintains from corrosion</span><br />
<span style="color: rgb(0, 0, 0);">• Acts as rust proofing agent before the application of paints or coatings.</span><br />
<span style="color: rgb(0, 0, 0);">• It doesn’t affect rubber and plasticcompounds</span></p>
<p>
<span style="color: rgb(0, 0, 0);"><strong>Note:-</strong> When cleaning aluminium, brass & copper flush with water upon completion of cleaning</span></p>
Related products
Product FAQs
From our blog
Need Metalic Brightner Eco Rust Clean for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote