Nitrite Borax Corrosion Inhibitor Powder
NITRITE BORATE BASED,CORROSION INHIBITOR
High performance nitrite based closed circuit inhibitor.
Key details
| Generic name | NITRITE BORATE BASED,CORROSION INHIBITOR |
|---|---|
| Active matter (%) | 98-100 |
| Standard packing | 25.00 Kg.PWD |
| Available pack sizes | Borax and Nitrite corrosion inhibitor available in 5 Kg, 10, 20, 25, 50 Kg Iron and Steel corrosion inhibitor. 800-2500 ppm recommended. |
| Supply locations | Corrosion Inhibitor Nitrite Borax based for cooling water circulation system manufacturer and supplier in Dubai, Nairobi, Mombasa, Kenya, Uganda, Mumbai, Kolkata, Visakhapatnam, Chennai, Haldai, Ennore, Paradip, Gandhidham, Surat, Canada, Dubai, Sharjah, Ajman, Abudhabi, UAE Middle East, Sohar Barka Muscat Oman |
Need this product at your port or plant?
Enquire NowEngine Jacket Cooling or heating system, Chiller Water Circuit, Glycol Brine System, Hot Water or steam Circuit, Engine Coolant,Process chilling and heating system etc.
Engine Jacket Cooling or heating system, Chiller Water Circuit, Glycol Brine System, Hot Water or steam Circuit, Engine Coolant,Process chilling and heating system etc.
Nitrite base Corrosion Inhibitor for Water and Glycol Brine is normally fed continuously to the re-circulating closed system by injection dosing pump of dosed to the expansion tank. The amount of Nitrite base Corrosion Inhibitor for Water and Glycol Brine required to inhibit corrosion depends on the type of system and plant operating conditions. The specific dosage rates can be specified by the testing and given parameter.
|
Appearance |
Colourless |
|
Odour |
Odourless |
|
pH |
11-12 approx |
| Boiling Point / Boiling Range |
Not determined |
|
Melting Point/Melting Range |
N/A |
| Flash Point | N/A |
| Flammability | Non flammable |
| Autoflammability | N/A |
| Explosive Properties | N/A |
| Oxidising Properties | N/A |
| Vapour Pressure | Not determined |
| Relative Density | 1.18 approx |
| Solubility in water | Miscible |
| Solubility in other solvents | Not determined |
| Partition coefficient and N-octanol/water | ---------- |
| Other Data |
None |
<div id="cke_pastebin">
TREATMENT Feature</div>
<div id="cke_pastebin">
Sodium Nitrate Iron and Steel corrosion inhibitor. 800-2500 ppm recommended.</div>
<div id="cke_pastebin">
Molybdate Slows the growth of bacteria.</div>
<div id="cke_pastebin">
Tolyltriazole Copper corrosion Inhibitor.</div>
<div id="cke_pastebin">
Synthetic polymer Prevents hard scale built up.</div>
<div id="cke_pastebin">
Borax buffer Corrects the water pH (Maintain pH level between 8.5 to 9.2).</div>
<div id="cke_pastebin" style="text-align: justify;">
Silicates A common corrosion inhibitor used by automotive antifreeze suppliers is silicates. Silicates have the disadvantage of building up an insulating layer on components and are not recommended for industrial engines. Concentration should not exceed 25 ppm.</div>
Benefit :::
Zero or negligible loss of metal or corrosion Excellent heat transferability and flow rate No need of descaling closed circuit equipments Long and extended life of Water without fouling
Related products
Need Nitrite Borax Corrosion Inhibitor Powder for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote