Surfactant Non Ionic fracturing RXSOL112
Surfactant RX 112 Non Ionic fracturing surfactant
Surfactant RX 112 (Non Ionic fracturing surfactant) is a non-ionic, non-flammable surfactant for use in acidizing and fracturing treatments. It is designed to improve recovery of the injected stimulation fluids and enhance ultimate recovery of hydrocarbons.
Key details
| Generic name | Surfactant RX 112 Non Ionic fracturing surfactant |
|---|---|
| Active matter (%) | 81-90 |
| Standard packing | 210.00 Kg.Liq |
| Available pack sizes | Surfactant RX 112 Non-Ionic fracturing surfactant available in 25, 50 Kg Liquid, and 210 Kg Drum packing. |
| Supply locations | Surfactant Non Ionic fracturing RXSOL112 manufacturer and supplier in India, UAE GULF, Middle East, Kenya Nairobi, Oman Muscat. RXSOL Surfactant Non Ionic fracturing RXSOL112 stockist and supplier in Fujairah, Ajman, Dubai, Sharjah, Abudhabi, Barka Sohar, Nairobi Kenya Africa, Canada |
Need this product at your port or plant?
Enquire NowSurfactant RX 112 (Non Ionic fracturing surfactant) is compatible with all known fracturing fluid additives and has been successfully used for the past few years. Surfactant RX 112 (Non Ionic fracturing surfactant) is also pumped with acid spearheads to lower the breakdown pressures and minimize the possibilities of forming acid/oil emulsions where a separate non-emulsifier is not used.
Compatibility:
Surfactant RX 112 (Non - Ionic fracturing surfactant) is compatible with most acidizing and fracturing treatment additives and friction reducers. However, a compatibility test is advised before use.
Typical Dosage:
Typically used at 1 to 2 GPT with stimulation fluids
Temperature Limitations:
Can be used across a wide temperature range, no lower temperature limitation on performance. Has been effectively used up to BHT of 350 F.
| Physical state | : | Liquid |
| Appearance | : | Aqueous Solution |
| Odor | : | Alcohol |
| Color | : | Clear Yellow |
| Odor threshold | : | Not applicable |
| pH | : | 9-11 |
| Freezing point | : | 5 °C / 41 °F |
| Boiling point | : | ~ 100 °C / 212 °F |
| Flash Point | : | > 93.3 °C / > 199.4 °F |
| Specific gravity | : | 0.99 - 1.05 g/cm3 |
Surfactant RX 112 (Non Ionic fracturing surfactant) effectively lowers interfacial tension between stimulation fluids and hydrocarbons. It lowers the capillary pressure and allows for greater penetration in to the formation face, therefore promoting the recovery of stimulation fluids, connate fluids and hydrocarbons.
Related products
Need Surfactant Non Ionic fracturing RXSOL112 for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote