Refrigerant Gas 22 BOTTLE
Refrigerant gas r22a purity 99.99%. Made in India. R22 is used as a refrigerant used in household, industrial and commercial air-conditioning systems. R22 can also be utilized as an aerosol propellant for pesticide and paint, or as a fire extinguishing agent
Key details
| Active matter (%) | 99.99 |
|---|---|
| Standard packing | 1.00 Cylinder |
| Available pack sizes | 57 Kgs |
Need this product at your port or plant?
Enquire NowFeatures
- All refillable cylinders are inspected prior to refilling
- Residue refrigerant recovered to prevent environmental damage
- Content is 100% genuine refrigerant from approved producer
- Conforms to ARI-700 purity standard
Benefits
- Worldwide compliance
- Assured quality
- Refillable cylinders
Refrigerant gas r22a purity 99.99%. R22 is used as a refrigerant used in household, industrial and commercial air-conditioning systems. R22 can also be utilized as an aerosol propellant for pesticide and paint, or as a fire extinguishing agent.
Refrigerant Distributors - India, Middle East, and Africa
| Contents | : | 56 |
| Weight | : | 57 |
| Colour | : | GREEN |
| ODP | : | 0.049 |
| GWP | : | 1810 |
ODP = Ozone Depletion Potential
GWP = Global Warming Potential (IPCC Fourth Assessment Report - AR4)
In response to growing environmental concerns, production of systems using R-22 refrigerant is being phased out. Now a days R-22 refrigerant gas replaces with chlorine-free R-410A refrigerant ( RXSOL-66-6625-010 ). Because R-410A contains no chlorine, it is considered ozone-friendly.
Differences between R-22 refrigerant and R-410A
R-22
R-22 was discontinued for use in new air conditioning systems
R-22 is a hydro-chlorofluorocarbon (HCFC) which contributes to ozone depletion dur to presence of chlorine.
R-410A
Approved refrigerant for use in new residential air conditioners
Is a hydro-fluorocarbon (HFC) which does not contribute to ozone depletion, FREE from CHLORINE.
R-410A can absorb and release more heat than R-22, your air conditioning compressor can run cooler, reducing the risk of compressor burnout due to overheating.
R-410A also functions at a higher pressure than R-22, so new compressors are built to withstand greater stresses, reducing the chance for cracking. If you were to put R-410A refrigerant into a system designed for R-22, the pressure would be too much and the unit would break.
All air conditioners use an oil to keep the compressor lubricated during operation. R-22 air conditioners use mineral oil and R-410A systems use synthetic oil. The synthetic oil is generally more soluble with R-410A than mineral oil is with R-22. This means the R-410A system operates more efficiently reducing wear and tear on the compressor.
Related products
Need Refrigerant Gas 22 BOTTLE for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote