DI CHLOR SDIC
SDIC Sodium Dichloroisocyanurate
Dichlor is a chlorine compound used to purify swimming pool and spa water. Its full name is sodium dichloro s triazinetrione or dichloroisocyanuric acid.
Key details
| Generic name | SDIC Sodium Dichloroisocyanurate |
|---|---|
| Active matter (%) | 58-65 |
| Standard packing | 50.00 Kg |
| Available pack sizes | Sodium Dichloroisocyanurate 60% - SDIC 60% Mesh Granular stock available in 5 Kg, 25 Kg, 50 Kg Bucket. Sodium dichloroisocyanurate dihydrate is a granular solid chlorine bleaching agent chemicals for chlorine disinfectant for the treatment of drinking water treatment. |
| Supply locations | DI Chlor, SDIC, Sodium Dichloro S Triazinetrione, Dichloroisocyanuric acid, DI CHLOR SDIC, SDIC Sodium Dichloroisocyanurate supplier in Mumbai, Gandhidham, Kandla, Chennai, Ennore, Visakhapatnam Gangavaram, Kolkata, Haldia, Gangavaram, Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Ruwi Barka, Muscat Oman, |
Need this product at your port or plant?
Enquire Now70
Di Chlor or Sodium Dichloroisocyanurate (SDIC) widely applied for the sterilization of swimming pool and drinking water, or fighting against infectious diseases, or act as disinfectant in raising silkworm, livestock, poultry and fish. Other applications of Di Chlor are found in wool shrinkage, textile bleaching, and industrial circulating water cleaning. Di Chlor is normally supplied in powder and granular, tablets are also available on request. Stabilised chlorine granular (dichlor) are used very widely to chlorinate swimming pool water. The product has high efficiency and constant performance and has no harm to human beings.
| Appearance | White Powder, Granular, |
| Chemical Name | Sodium Dichloroisocyanurate |
| Formula | C3O3N3Cl2Na |
| Chlorine | >62% |
| Molecular Weight | 219.95 |
| pH (1% solution) | 6.0 to 7.0 |
| Moisture | 0.5 to 1.00% max |
| Solubility @ 25°C | Completely soluble in water |
| Density | Tap density = 0.974 g/mL |
The requirements for pool water testing in the application of dichlor based products should be indicated on the product label. The primary parameter to be tested is the level of FAC in the water. The choice of testing methods will vary depending on the type of pool (residential or commercial) and local regulations and standards. The product label should recommend that the pool water quality be properly balanced. This requires testing of the pool water balance parameters of pH, alkalinity, calcium hardness, and stabilizer (i.e. cyanuric acid).
The amount of product to be used or dispensed depends upon the specific application and the volume of water being treated. For example, in routine sanitizing use, the objective is to maintain a residual available chlorine (FAC) concentration of 1.0 ppm – 4.0 ppm for pools and 2.0 ppm – 5.0 ppm for spas. The label use instructions will explain how to determine a typical dosage for the water volume to be treated. Label use instructions will similarly define dosage requirements for other product applications such as oxidation, shock treatment or superchlorination.
Related products
From our blog
Need DI CHLOR SDIC for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote