Procedure for Use:-RXSOL-16-1011-210 is highly concentrate

Dilute in water (always use plastic jar and RXSOL-16-1011-210 should be added to water never add water to RXSOL-16-1011-210.)

Surface should be sound clean and free from oil, grease, dirt etc.

Before Application degrease and remove oily painted area, Then apply Metals Rust stain Brites Cleaner on the metal surface to get complete reaction of rust particle with metal bright till full dry the surface area. Repeat the metal bright 2nd times to get complete reaction of rusted surface. This will help to get solid chemically treated base for NEW PAINT COATING.

CONCENTRATION of Metal Bright : 10 to 40% for removal of light rust stain, while direct and neat Metals Rust stain Brites Cleaner required to dissolved heavy rusted stains.

Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)

Spraying Direction: – Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metals Rust stain Brites Cleaner This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metals Rust stain Brites Cleaner will show up in a Wall Wash.

Injection– Not suitable.

Re-circulation: – When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.