Alkalinity Test Kit p-m Total

Part No. RXSOL-62-5515-001

Alkalinity TEST FOR BOILER and COOLING WATER

Key Technical Details

Part number	RXSOL-62-5515-001
Standard packing	1.00 Full SET
Available pack sizes	full set
Supply locations	Alkalinity Test Kit p-m Total alkalinity kit manufacturer and supplier in Mumbai, Navi Mumbai MIDC, Kandla Gandhidham, Surat, Muscat Sohar Oman, Fujairah, Sharjah, Dubai, Abudhabi, Ajman, Diera, Kolkata, Haldia, Paradip, Viskhapatnam, Chennai, Ennore, Kakinada, Manglore, Goa, Sikka - Jamnagar, Mundra, Gujrat GIDC

Request a Quote All Products

Application

p Alkalinity and Total Alkalinity :

Optimum Result : p-Alkalinity level is between 100 to 150 PPM is suggested.

if p-Alkalinity level is more then 150 ppm then level should be reduced by increased BLOW DOWN process with immediate effect. 

For Below 50 ppm , Dose ½ Ltrs of RXSOL-50-5001-BWT for 1000 Ltrs of BOILER WATER , to maintain p-Alkalinity level 100 ppm.

:::::::::::::::::::::Alkalinity TEST FOR BOILER & COOLING WATER ::::::::::::::::::::::::
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td colspan="2">
REAGENT & APPARATUS</td>
</tr>
<tr>
<td colspan="2">
Reagent: RXSOL TK 7 , TK 8 , TK 9 , . Apparatus : TEST TUBE , Titrator or DROPPER</td>
</tr>
<tr>
<td colspan="2">
A.) PROCEDURE for p-ALKALINITY test ( STEP WISE )</td>
</tr>
<tr>
<td>
1</td>
<td>

Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER
</td>
</tr>
<tr>
<td>
2</td>
<td>

Add 1-2 drops of RXSOL TK7 and mix with the stirring rod , If sample turns red / PINK ( which indicates presence of p-Alkalinity ) then follows 3rd step otherwise if sample remains colourless ( Record p-Alkalinity = 0 ) .
</td>
</tr>
<tr>
<td>
3</td>
<td>

Add RXSOL TK9 drop by drop ( by counting ) , mixing with the stirring rod until colour just disappears. Each drop is equivalent to 25 ppm of p-Alkalinity , expressed as CaCO3 
</td>
</tr>
<tr>
<td>
RESULT</td>
<td>
Each DROPS is equivalent to 25 PPM of p-Alkalinity.</td>
</tr>
<tr>
<td>
NOTE</td>
<td>
p-Alkalinity VALUE = 25 X ( Total Number of DROPS of TK9 , during 3rdstep )</td>
</tr>
</tbody>
</table>

Using Procedure

B.) PROCEDURE for m-ALKALINITY test ( STEP WISE ) 1.1 >> Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER 1.2 >> Add 2-3 drops of RXSOL TK8 and mix with stirring rod , the sample will turn to BLUISH-GREEN . 1.3 >> Add RXSOL TK9 carefully by counting drop by drop and mixing throughly until a light reddish (salmon) pink colour develop. RESULT : Each DROPS is equivalent to 25 PPM of m- Alkalinity m-Alkalinity VALUE = 25 X ( Total Number of DROPS of TK9 , during 1.3 step )
C.) PROCEDURE for TOTAL ALKALINITY ( VALUE of A + VALUE of B )
2.1	Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER
2.2	Add 1-2 drops of RXSOL TK7 and mix with the stirring rod , If sample turns red / PINK ( which indicates presence of p-Alkalinity ) then follows 3^rd step otherwise if sample remains colourless ( Record p-Alkalinity = 0 ) then proceed to STEP- 4.
2.3	Add RXSOL TK9 drop by drop ( by counting ) , mixing with the stirring rod until colour just disappears. Each drop is equivalent to 15 ppm of p-Alkalinity , expressed as CaCO₃
2.4	Add 2-3 drops of RXSOL TK8 and mix with stirring rod , the sample will turn to BLUISH-GREEN .
2.5	AddRXSOL TK9 carefully by counting drop by drop and mixing throughly until a light reddish ( salmon ) pink colour develop.
RESULT	Each DROPS is equivalent to 25 PPM of Alkalinity
NOTE	p-Alkalinity ppm CaCO₃VALUE = 25 X ( Total Number of DROPS of TK9 , during 2.3step ) = X ( Say ) m-Alkalinity ppm CaCO₃VALUE = 25 X ( Total Number of DROPS of TK9 , during 2.5 step ) = Y ( Say ) Total Alkalinity ppm CaCO₃VALUE = X+Y

alkalinity test method , alkalinity method, alkalinity test procedure, alkalinity titrator chemicals, water alkalinity test kit

alkalinity test kit for boiler water and cooling water, alkalinity test kit instructions

Technical Specifications

OFFER :::---
Do not forget to ask JUMBO PACK OFFER ( TK - extra pack )

Ask for FREE TK extra pack

Remarks

Avoid contact with EYE / Hand and other CHEMICALS and Gases. 


For determination of Hydroxide alkalinity only, barium chloride is added prior to titration to precipitate the carbonate ions. Titration is then taken only to the phenolphthalein end point. A pH meter may be used instead of the indicators to determine the end points of the titration.

Note

NUMBER OF DROPS OF TK9		p-Alkalinity as CaCO3
1	>>>>>>>>>>>>>>>>>>>>>>>>>>	25
2	>>>>>>>>>>>>>>>>>>>>>>>>>>	50
3	>>>>>>>>>>>>>>>>>>>>>>>>>>	75
4	>>>>>>>>>>>>>>>>>>>>>>>>>>	100
5	>>>>>>>>>>>>>>>>>>>>>>>>>>	125
10	>>>>>>>>>>>>>>>>>>>>>>>>>>	250
20	>>>>>>>>>>>>>>>>>>>>>>>>>>	500
30	>>>>>>>>>>>>>>>>>>>>>>>>>>	750
40	>>>>>>>>>>>>>>>>>>>>>>>>>>	1000

Optimum Result : p-Alkalinity level is between 100 to 150 PPM is suggested.

if p-Alkalinity level is more then 150 ppm then level should be reduced by increased BLOW DOWN process with immediate effect.

For Below 50 ppm , Dose ½ Ltrs of RXSOL-50-5001-BWT for 1000 Ltrs of BOILER WATER , to maintain p-Alkalinity level 100 ppm.

Refill pack : REPLACEMENTS

TK7 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available

TK8 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available

TK9 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available

total alkalinity test kit manufacturer, Exporter and supplier in mumbai, kandla, Gandhidham, chennai, Ennore, Kolkata, Kakinada, Vizag, Manglore, Goa, Tuticorin, Fujairah, Dubai, Sharjah, Uae, Middle East

Product video

Watch on video

Need Alkalinity Test Kit p-m Total for your operation?

Our team helps with product selection, dosage, safety data and delivery worldwide.

Request a Quote

Marine & industrial chemicals, delivered worldwide.

Get in Touch

Learn More

Enquiries

Alkalinity Test Kit p-m Total