Disc Separator Clean

Deck cabin galley Maintenance Disc Separator Clean
Express Port Supply: 2-4 Hr Berth Delivery Across Major Indian & UAE Ports
ISO 9001:2015 Certified QA
IMPA / ISSA Marine Standard
Ready Stock 25L, 210L, IBC
Deck cabin galley Maintenance

Disc Separator Clean

Part No. RXSOL-16-1007-020

Separator Disc Cleaner

An extremely effective for removal of burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters. Also SALT DEPOSITION ( Salts of Calcium Carbonate etc. ) NOTE:- Mechanical cleaning ( Scrubbing an

Key Technical Details
Part number RXSOL-16-1007-020
Generic name Separator Disc Cleaner
Active matter (%) 95-98%
Standard packing 20.00
Available pack sizes 20 ltr.
Supply locations Disc Separator Clean supplier in Mumbai, Chennai, Vizag Visakhapatnam, Kandla Gandhidham, Kolkata Haldia, Paradip, Manglore, Goa, Surat Hazira, Fujairah, Dubai, Sharjah, Ajman, Dubai, Muscat Oman, Canada BC
Application

FIELDS:-
A very fast  & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits  which collect  in fuel &  lube oils centrifugal separators disc stacks.

Flash point  cc                             :  None
IMO-Code                                     :  8-2031-T700.

NATURE OF SPECIAL RISKS AND SAFETY ADVICE

In accordance with the latest E.E.C. Council directives:

R 36                :     Irritating to eyes and skin.
S 2                   :     Keep out of reach of children.
S 28                 :    After contact with skin rinse immediately with plenty of water.

Using Procedure

For General cleaning it Should be diluted ,at the rate of 1-parts RXSOL-16-1007-025 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend  on nature of dirt / contamination  . For Heavy deposition , immerse the stainless Steel DISCS in the container with concentrated RXSOL-16-1007-025  for 15 minutes to 3 Hrs.  At 50 to 60°C ( Heating is not necessary ) . 
After the unit or parts have been satisfactorily cleaned, remove the discs by using RUBBER GLOVES and rinse thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium. Then separator discs can be used immediately. 

NOTE:- 
Recirculation  and  heating will improves the cleaning action.

Product FAQs

Need Disc Separator Clean for your operation?

Our team helps with product selection, dosage, safety data and delivery worldwide.

Request a Quote