Emulsifier SOPEP
Part No. RXSOL-25-1048-125
Oil Emulsifying Agent
Specially designed for complete emulsification of oil by which subsequent dispersion takes place.
Key details
| Part number | RXSOL-25-1048-125 |
|---|---|
| Generic name | Oil Emulsifying Agent |
| IMPA code | 551214 |
| Active matter (%) | 78-83% |
| Standard packing | 25.00 |
| Supply locations | Oil Spill Emulsifier manufacturer and supplier in India - UAE Middle East and Oman. We are keeping various packing of oil spill emulsifier to supply in Dubai, Sharjah, Fujairah, Ajman, Abudhabi, Muscat, Sohar Oman. And in INDIA we are one of largest oil spill emulsifier manufacturer and supplier in Mumbai MIDC Maharastra, Dahej, Kandla Mundra, Manglore, Visakhapatnam, Chennai Ennore, Kolkata Haldia, Paradip, Dhamra |
Need this product at your port or plant?
Enquire NowOil spills at sea, harbours, beaches, or on land. Can also be used in industries.
- Shipboard oil spill cleanup
- Deck and engine room spill removal
- Fuel oil contamination on ship surfaces
- Bilge and bunker spill treatment
- Oil spill response in harbors and ports
- Beach contamination cleanup
- Offshore platform spill treatment
- Refinery spill cleanup
- Storage tank area contamination
- Petrochemical plant maintenance
- Crude oil
- Fuel oil
- Diesel
- Lubricating oil
- Bitumen residues
- Kerosene and white spirit
- Determine spill area and type of oil.
- Apply emulsifier directly onto the oil slick using spray equipment.
- Allow several minutes for penetration.
- Natural mixing with water disperses the oil droplets.
- Repeat treatment if required.
- Spray emulsifier on contaminated surface.
- Allow to soak for 5–10 minutes.
- Scrub surface if necessary.
- Rinse with water or high-pressure wash.
- Apply product directly on oil deposits.
- Allow penetration time.
- Rinse using seawater or pressure wash.
| Appearance | Clear liquid |
| Color | Colorless |
| Odor | Odorless |
| Initial Boiling Point | 240oC |
| Final Boiling Point | >262oC |
| Flash Point | 85oC |
| Autoignition Temperature | >220oC |
| Lower Explosion Limit (vol %) | 0.6% (v/v) |
| Upper Explosion Limit (vol %) | >5.5% (v/v) |
| Vapour Pressure | 0.0003 kPa at 20oC |
| Relative vapor density (air= 1) | 0.01 |
| Aromatics | 0.4% |
| Specific Gravity (gr/cm3) | 0.81 at 200C |
| Solubility | Soluble |
| pH (in 1% dispersion) | 7 |
| Pour point (at 0°C) | - 30 |
| Viscosity (at 0°C) (cSt) | 3 |
Emulsifier SOPEP is a high-performance oil spill emulsifying agent specially formulated to disperse hydrocarbons into fine emulsions, enabling easy removal or biodegradation. It rapidly penetrates oil films and breaks them into microscopic droplets that mix with water and disperse effectively.
The product is widely used for cleaning oil spills on ships, docks, harbors, offshore platforms, beaches, and industrial surfaces. It is effective against a wide range of petroleum products including crude oil, diesel, fuel oil, lubricants, and kerosene.
The formulation typically consists of biodegradable surfactants, emulsifying agents, and low-toxicity solvents designed to disperse oil while minimizing environmental impact.
Biodegradable and having low toxicity . Self –life 5 YEARS( from mfr. date ) .
HIGH – Emulsification rate Converts hydrocarbons particle in to very fine emulsions.Ready to use product. Suitable for Crude / Bitumen / Residual / Diesel / Kerosene, White spirit & Lube oils etc .Effective on oil spills at platefoprm , during loading or discharging of cargo or bunkers .For cleaning of spills on Deck, Ships side, Piers, Wharfs, etc. where allowed .
Need Emulsifier SOPEP for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote