Applications

RXSOL Enviro 2000 Soft can be used for:

Marine Applications

• Engine-room cleaning

• Deck cleaning

• Tank cleaning

• General shipboard cleaning

• Accommodation-area cleaning

• Bulkhead cleaning

• Floor cleaning

• Machinery-area cleaning

• Routine degreasing operations

Industrial Applications

• Industrial equipment cleaning

• Workshop cleaning

• Machinery exterior cleaning

• General surface degreasing

• Pressure-washing operations

• Removal of general dirt and oily contamination

Tank Cleaning

RXSOL Enviro 2000 Soft can be used as a general-purpose tank cleaner and degreaser where a water-based, non-foaming cleaning product is appropriate.

It is also listed for use on stainless-steel tanks with epoxy or phenolic linings, subject to compatibility and the applicable cleaning procedure. (Vizag Chemicals)

Pressure-Washing Applications

The low-foaming characteristics of RXSOL Enviro 2000 Soft make it suitable for use with pressure-washing equipment.

For pressure-washing, the appropriate dilution should be selected according to the type and severity of contamination, equipment and cleaning conditions.

Manual Cleaning

For manual degreasing, RXSOL's product information indicates that the cleaner may be applied neat or diluted with water up to approximately 1 part product to 15–20 parts water, using a cloth, brush or spray. (rxmarine.com)

For heavier deposits, a stronger solution may be required. Always conduct a small compatibility test before large-scale application.

Spot Cleaning

For spot cleaning, the product information indicates that RXSOL-20-3022-025 can be sprayed neat or diluted with water up to approximately 1 part product to 5 parts water, followed by a contact period of approximately 15–20 minutes and subsequent water-jet rinsing. Heated wash water around 40–60°C may improve cleaning performance where the equipment and surface permit. (Vizag Chemicals)

Hydrocarbon-Freeing Applications

RXSOL Enviro 2000 Soft can also be incorporated into cleaning procedures following the use of stronger hydrocarbon/solvent-based cleaners, where a final water-based cleaning or degreasing step is required.

The current RXSOL information specifically references its use after products such as fuel/tank cleaners and solvent cleaners. (Vizag Chemicals)

A versatile cleaner which can be used for Tank or general cleaning.

MANUAL DEGREASING: May be applied neat or diluted with water up to  1 part to 15 – 20 parts by using a cloth, brush or spray. After use as an engine room cleaner, bilge slops must be allowed to separate for at least 3 hrs before passing through an oily water separator.
Tank & BILGE CLEANING: RXSOL-20-3022-025  is recommended for any of the standard tank cleaning methods including ship motion, pressure spray washing and recirculation method after mineral, animal, fish and vegetable oils.