Hydrotest Water
Part No. RXSOL-81-2204-210
Hydrotest Water
Extremely high quality Hydrotest Water.
Key Technical Details
| Part number | RXSOL-81-2204-210 |
|---|---|
| Generic name | Hydrotest Water |
| Standard packing | 210.00 |
| Available pack sizes | 25, 50, 210 Ltrs and 1000 Ltr IBC Tanks. |
| Supply locations | Hydrotest Water manufacturer Turbhe Navi Mumbai, Gandhidham GIDC ANJAR, Howrah Andul Kolkata Haldia, Visakhapatnam, Chennai Dubai, Sharjah, Ajman, Abudhabi, Fujairah UAE, Muscat Barka Ruwi Ghala Oman, Kenya Nairobi, Canada |
Industries rely on hydrostatic testing to ensure safe operation, regulatory compliance, and long-term equipment reliability. Common applications include:
Chemical Processing Equipment
Reactors, heat exchangers, and process piping are tested to confirm they can withstand corrosive chemicals and elevated pressures.
Transport Vessels and Storage Tanks
Confirms the safety of tanks and containers used for transporting or storing pressurized materials.
Power Generation Systems
Boilers, condensers, and cooling systems require tests to confirm pressure integrity before operation.
Many of these systems must meet strict regulatory standards such as those set by the Department of Transportation (DOT), ASME, or other industry authorities.
The process follows a structured sequence to safely evaluate pressure containment systems.
1. Filling the Vessel with Test Fluid
The vessel, pipe, or component is completely filled with water or a specialized fluid. Air is removed to prevent compressibility issues that could affect test accuracy.
2. Increasing the Pressure
Pressure is gradually increased using pumps until it reaches the specified test pressure. This pressure is typically higher than normal operating pressure to create a safety margin.
3. Monitoring for Leaks or Deformation
Technicians carefully observe the system for:
- Pressure drops
- Visible leaks
- Structural deformation
- Weak welds or joints
If no issues appear during the inspection period, the equipment passes the test.
4. Pressure Release and Draining
After inspection, pressure is slowly released, and the test fluid is drained from the system. The equipment may then undergo drying or corrosion protection procedures before being placed into service.
|
Mol. Formula |
H2O |
|
M.W |
18.015 |
|
Conductivity |
2.0 S/CM |
|
PH |
6.00 -7.50 |
|
Total Hardness |
0.2 mg/l as CaCo3 |
|
Chloride |
0.1 mg/l as Cl |
|
Total Alkalinity |
0.1 mg/l as CaCo3 |
|
Iron |
0.02 mg/l as Fe |
|
Copper |
0.03 mg/l as Cu |
|
Nickel |
0.01 mg/l as Ni |
|
Oxygen |
0.01 mg/as O2 |
|
Silica |
0.005 mg/l as SiO2 |
|
Substances reducing permanganate |
0.00004 |
Advantages of using Hydrotesting Water
Hydrostatic testing remains the preferred inspection method for pressure systems because it offers several important benefits.
Reliable Leak Detection
Testing under pressure reveals small leaks that could become major failures during operation.
Cost Savings Through Early Detection
Identifying structural weaknesses during testing prevents expensive repairs or catastrophic failures later.
Regulatory Compliance
Hydro tests help organizations meet industry regulations and safety standards.
Extended Equipment Life
Routine testing verifies system integrity and supports long-term asset reliability.
By validating pressure containment systems before operation, hydrostatic testing protects personnel, equipment, and the environment.
Hydrostatic testing generally falls into two categories, depending on the objective.
Type I Initial Verification
This test occurs after manufacturing or installation. It confirms the entire vessel or system meets pressure design specifications before entering service.
Type II Component Testing
Component testing focuses on individual parts within a system. Valves, pipe sections, and fittings may undergo testing to verify their performance within larger assemblies.
Need Hydrotest Water for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote
