<div id="cke_pastebin">
<span style="font-size:14px;">To get the best results the surfaces to be etched should be sound, clean & dry.</span></div>
<div id="cke_pastebin">
 </div>
<div id="cke_pastebin">
<span style="font-size:14px;">Ensure surfaces being painted are dry, and cleaned to remove all contaminants.</span></div>
<div id="cke_pastebin">
 </div>
<div id="cke_pastebin">
<span style="font-size:14px;">Before applying your Mordant T Wash Solution ensure you are wearing suitable protection including gloves & eye protection. As with all our products this is a professional product for getting a professional result.</span></div>
<div>
 </div>
<h3>
<span style="font-size:14px;"><strong>How to use Mordant Pre Treatment Etching Wash</strong></span></h3>
<h3>
 </h3>
<ul>
<li>
<span style="font-size:14px;">Apply Mordant Pre Treatment Etching Wash & allow to turn black.  Once this has happened, wash with clean water.  This is usually after it is fully dried.  Any areas that havent turned black, (usually due to surface contamination) should be abraded using a suitable abrasive paper, then re-apply, however avoid over application as any pooling may result in the formation of fine brown deposits of copper.  After rinsing with clean water and allowing to dry before priming.</span></li>
</ul>
<p>
 </p>
<ul>
<li>
<span style="font-size:14px;">Very Important  Once the pre-treated Mordant Pre Treatment Etching Wash surface has dried, it should be over painted with the appropriate metal primer within 48 hours or contamination may occur, affecting the end result. </span></li>
</ul>
<p>
 </p>
<ul>
<li>
<span style="font-size:14px;">Mordant Pre Treatment Etching Wash should be stored between 5 -25 degrees C and when not in use, cans should be kept sealed.  For guidance, Mordant Pre Treatment Etching Wash has a 12 month shelf life from the delivery date in their original containers.</span></li>
</ul>