Rust Remover
Part No. RXSOL-16-1088-210
Rust Cleaning chemicals
Excellent pre treatment and binder for metal surfaces to be painted. concentrated blend of rxsol proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surfac
Key Technical Details
| Part number | RXSOL-16-1088-210 |
|---|---|
| Generic name | Rust Cleaning chemicals |
| Active matter (%) | 81-90 |
| Standard packing | 210.00 |
| Available pack sizes | 5, 10, 20, 25, 50, 210 Ltrs available stock in Kandla Deendayal Port, Mumbai, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Sharjah, Dubai. Mail us for factory sale discounted price. |
| Supply locations | Rust Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Rust Remover at a competitive price from us. We have ready stock of Rust Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders. |
RXSOL Rust Remover is recommended for cleaning rust and corrosion from:
- Ship decks and steel structures
- Marine equipment and machinery
- Engine-room components
- Steel pipes and pipelines
- Tanks and fabricated steel sections
- Nuts, bolts, tools and mechanical components
- Workshop equipment
- Heat-transfer equipment where compatible
- Rusted steel prior to painting or coating
- Industrial plant and maintenance equipment
Very effective products to removes rust and stains also improves metal appearance.
Direction for use
For rust removal the surfaces to be treated should be free form loose materials, flaking paint, dirt or oil. In most cases diluted solution of RXSOL-16-1088-025 , can be applied by brush ranging from 10-50% and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet . Smaller objects can be soaked in plastic container. After cleaning, rinse items thoroughly with a water jet.
• For aluminium , only diluted solution up to 10 - 25% can be used and rinse with in 10- 30mins.
• For stainless Steel Disc Cleaning (never use on copper, brass or bronze parts), dilute to 4 - 10 parts water, and immerse from 1 - 3 hours depending on the severity of the job concerned. Cleaning will be accelerated with elevate4d temperatures up to 60°C and agitaion. After cleaning rinse thoroughly with clean water.
For best performance on aluminium use RXSOL Degreaser for degreasing as it has a neutral pH. Paintwork :
RXSOL-16-1011-RR should be diluted with water 1:4 . Then solution can be applied by brushing, spraying for 10 - 20 minutes the residues should be rinsed off thoroughly with high pressure water.
Very effective products to removes rust and stains also improves metal appearance.
Direction for use
For rust removal the surfaces to be treated should be free form loose materials, flaking paint, dirt or oil. In most cases diluted solution of RXSOL-16-1011-RR-210 , can be applied by brush ranging from 10-50% and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet . Smaller objects can be soaked in plastic container. After cleaning, rinse items thoroughly with a water jet.
• For aluminium , only diluted solution up to 10 - 25% can be used and rinse with in 10- 30mins.
• For stainless Steel Disc Cleaning (never use on copper, brass or bronze parts), dilute to 4 - 10 parts water, and immerse
from 1 - 3 hours depending on the severity of the job concerned. Cleaning will be accelerated with elevate4d temperatures
up to 60°C and agitaion. After cleaning rinse thoroughly with clean water.
For best performance on aluminium use RXSOL Degreaser for degreasing as it has a neutral pH. Paintwork :
RXSOL-16-1011-RR-210 should be diluted with water 1:4 . Then solution can be applied by brushing, spraying
for 10 - 20 minutes the residues should be rinsed off thoroughly with high pressure water.
on completion of degreasing CLEANING OPERATION if rust / scale ( water ) stains from metal surface ,use 10 to 50% of RXSOL-16-1011-RR-210 with fresh water for 20 -30 minutes . For detailed instruction pl. click on this link http://tiwariindia.com/wiki/index.php/Main_Page .
Appearance : Clear & Colourless fLiquid
Specific gravity (200C) : 1.21
Flash point cc : None
R 34 : Causes burns.
S 26 : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.
Note : Also can be used for Disc cleaning without dismantling disc stacks
: Improves efficiency of centrifuge installation.
Recommended Dilution & Application
For heavy rust and severe corrosion deposits, RXSOL Rust Remover may be used neat or at high concentration, subject to the substrate and the approved product formulation.
For medium rust, a typical starting dilution of 1 part product with 1–3 parts water may be used.
For light rust, oxidation and routine maintenance, dilution may be increased to approximately 1:5 to 1:10 with water.
Apply the prepared solution uniformly to the rusted area using a suitable acid-resistant brush, spray equipment or immersion tank. Allow sufficient contact time for the rust to soften and dissolve. Agitation or brushing can accelerate removal of stubborn deposits.
Do not allow the product to dry on the surface. After cleaning, rinse thoroughly with fresh water.
For steel surfaces that will not immediately be painted or coated, an appropriate neutralization/passivation or temporary corrosion-protection treatment is recommended to minimize flash rusting.
Immersion Cleaning
Small rusted components such as tools, bolts, fittings and mechanical parts may be immersed in a suitably diluted solution.
Typical procedure:
- Remove loose dirt, oil and grease before treatment.
- Prepare the required RXSOL Rust Remover solution.
- Immerse the component and periodically inspect the surface.
- Remove when the required degree of rust removal has been achieved.
- Rinse thoroughly with fresh water.
- Neutralize where required.
- Dry promptly and apply corrosion protection if the component is not immediately coated.
On completion of degreasing CLEANING OPERATION if rust / scale ( water ) stains from metal surface ,use 10 to 50% of RXSOL-16-1088-025 with fresh water for 20 -30 minutes.
Appearance : Clear & Colourless fLiquid
Specific gravity (200C) : 1.21
Flash point cc : None
Note : Also can be used for Disc cleaning without dismantling Disc Stacks
: Improves efficiency of centrifuge installation.
Typical Specifications
| Property | Typical Specification |
|---|---|
| Product Name | RXSOL Rust Remover |
| Product Type | Acid-based rust and scale remover |
| Appearance | Clear to slightly hazy liquid |
| Colour | Colourless to pale coloured* |
| Odour | Characteristic acidic odour |
| pH | Strongly acidic, typically 2 |
| Specific Gravity @ 25°C | Typically 1.10–1.25* |
| Solubility in Water | Completely miscible |
| Active Function | Rust / iron oxide dissolution |
| Foam | Low to moderate |
| Application | Brush, spray, immersion or circulation |
| Dilution | Neat or diluted depending on rust severity |
| Rinsability | Excellent with fresh water |
| Principal Use | Rust, corrosion and scale removal |
Exact values should be confirmed against the final RXSOL formulation and batch COA.
Cleans and brightens aluminium and copper.
Removes rust stains without risk to paintwork.
Safe on most common metals for Rust Removel & Passivation
Key Features of Rust Remover RXSOL
- Effective removal of rust and iron oxide deposits
- Helps remove corrosion scale and mineral deposits
- Concentrated liquid formulation
- Penetrates heavily rusted surfaces
- Reduces extensive mechanical scraping and wire brushing
- Suitable for marine and industrial maintenance
- Can be applied by brushing, spraying, soaking or circulation, depending on the equipment and application
- Useful for surface preparation before painting or protective treatment
- Water-rinsable after cleaning
- Suitable for controlled dilution according to the degree of contamination
This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.
Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift as shower is recommended.
R 34 : Causes burns.
S 26 : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.
Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift; as shower is recommended
Product video
Watch on videoRelated products
Need Rust Remover for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote
