Soot Stick
Part No. RXSOL-70-7010-025
Soot Remover Stick
Soot Stick Soot Remover is a dry compound formulated for safe removal of soot and deposits from boilers and diesel engine exhaust systems.
Key Technical Details
| Part number | RXSOL-70-7010-025 |
|---|---|
| Generic name | Soot Remover Stick |
| Standard packing | 25.00 |
| Supply locations | Soot Stick manufacturer supplier distributor in Mumbai, Kandla, Surat, Gujrat, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Soot Stick at a competitive price from us. We have ready stock of Soot Stick in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders. |
Product Properties
If deposits are allowed to form on heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is Approximately equivalent to a 10% efficiency loss, a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is around 600°C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Soot Remover, the ignition temperature of the soot/deposit is reduced to less than 280°C. The carbon deposits are thus ignited, leaving an easily removed ash. The use of Soot Remover not only provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i.e. heat exchangers, super heaters, economizers, exhaust paths/stacks.
Directions for Use and Dose Rates
Soot Remover should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber. For Diesel engines, inject Soot Remover directly into the exhaust system upstream of the area to be treated.
For provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i. e. heat exchangers, super heaters, economizers, exhaust paths / stacks.
Soot Remover should be introduced to the boiler through a suitable port, preferably with an injector, ensuring that the liquid is spread through the flame path toward the back of the combustion chamber.
Boiler
|
Steam Rased Tons / Hour |
Fuel Used Tons/Day |
Dose Rate Kg/ Day |
|
3.00 |
5.50 |
1.00 |
|
6.00 |
11.00 |
2.00 |
|
9.00 |
16.00 |
3.00 |
| 12.00 | 21.00 |
3.50 |
| 15.00 | 27.00 |
4.00 |
| 23.00 | 41.00 |
4.50 |
| 31.00 | 55.00 |
5.00 |
| 46.00 | 82.00 |
5.50 |
| 62.00 | 110.00 |
6.50 |
Diesel Engine
|
Fuel Consumption Tons/Day |
Dose Rate Kg/ Day |
| 10.00 |
1.50 |
| 20.00 |
3.00 |
| 30.00 |
3.50 |
| 40.00 |
4.00 |
| 50.00 |
4.50 |
Product Properties:-
|
APPEARANCE: |
Blue green STICK |
|
DENSITY in g/cm3 at 15°C: |
1.2-1.4 |
|
FLASH POINT (PMCC) °C: |
Not applicable |
|
COMPATIBILITY: |
|
|
Metal: |
If moist, may attack mild steel, iron and aluminum Rubber: No known effect |
|
Rubber: |
Related products
Need Soot Stick for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote
