Vapor Treatment
Part No. RXSOL-51-6001-025
Evaporator Treatment Chemicals
Neutral Liquid for prevention of scale in seawater Evaporators
Key Technical Details
| Part number | RXSOL-51-6001-025 |
|---|---|
| Generic name | Evaporator Treatment Chemicals |
| Active matter (%) | 81-90 |
| Standard packing | 25.00 |
| Available pack sizes | Evaporator Treatment Chemicals for Boiler Water Treatment available in 5, 20, 25, 50, 210 Ltr packing. |
| Supply locations | VapourTreatment (For controlling of Scale & Foam) ::: Neutral Liquid for prevention of scale in seawater Evaporators This is a highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc. RXSOL-51-6001-025 is a concentrated solution of a POLYELECTROLYTE polymer and antifoaming agents for use in SEA WATER evaporator as a controller of scale and foam in side the evaporators. It can be used as a scale inhibitor in the feed water to EVAPORATORS producing fresh water . A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators Procedure Of Use and Dose Rates: POLYELECTROLYTE polymer of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and easily removed from the evaporator line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR. Used in both high and low pressure evaporators. Dosage : Daily Out Put Evaporator Daily RXSOL VT 6001 Requirement 10 -20 MT 100-200 ML 30-40 MT 300-400 ML 50-60 MT 500-600 Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting i.eThis will last 24 hours. Note: We can remove existing mineral scale deposits by using A 5-10% solution of RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ). CharactersItics Properties Appearance Thermal Firmness Clear yellow liquid 250° C By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency. Density In g/cm3 at 15°C: 1.1 Permits more efficient evaporation. pH (1 Vol%) 9 Reduces downtime and maintenance costs. Compatibility Concentrated, safe liquid, easy and economical dosing. Metal No known effect For use in both high pressure and vacuum evaporators Rubber No known effect The antifoaming properties ensure that distillate quality is high Packaging 20 / 25 ltr Improves the quality of distilled water VAPT REAT Evaporator Treatment Chemicals supplier in Mumbai, Kandla - Deen Dayal Upadhyay Port, Gandhidham, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Ajman, AbuDhabi - Middle East - UAE., Nairobi Kenya Africa, CANADA, Ruwi Barka Muscat Oman |
Procedure Of Use and Dose Rates: POLYELECTROLYTE polymer of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and easily removed from the evaporator line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.
Used in both high and low pressure evaporators.
Dosage :
| Daily Out Put Evaporator | Daily RXSOL VT 6001 Requirement |
| 10 -20 MT | 100-200 ML |
| 30-40 MT | 300-400 ML |
| 50-60 MT | 500-600 |
Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting i.eThis will last 24 hours.
Note: We can remove existing mineral scale deposits by using A 5-10% solution of RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).
| CharactersItics | Properties | |
| Appearance Thermal Firmness | Clear yellow liquid 250° C | By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency. |
| Density | In g/cm3 at 15°C: 1.1 |
Permits more efficient evaporation. |
| pH (1 Vol%) | 9 |
Reduces downtime and maintenance costs. |
| Compatibility | Concentrated, safe liquid, easy and economical dosing. | |
| Metal | No known effect |
For use in both high pressure and vacuum evaporators |
| Rubber | No known effect | The antifoaming properties ensure that distillate quality is high |
| Packaging |
20 / 25 ltr |
Improves the quality of distilled water |
RXSOL-51-6001-025 is a concentrated solution of a POLYELECTROLYTE polymer and Antifoaming Agents for use in SEA WATER evaporator as a controller of scale and foam in side the evaporators. It can be used as a scale inhibitor in the feed water to EVAPORATORS producing fresh water .
A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators
Evaporator Treatment Chemicals to protect deposition of SCALE in fresh water generator. RXSOL Vapor Treatment is effective and concentrated ANTI-SCALE for water generator system. Improves the quality of distilled water.
Related products
Need Vapor Treatment for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote
