<p style="text-align: justify">
<strong>Pilot Bottle</strong><strong>-</strong><strong>Type Injector</strong><strong>:</strong>Make sure bottle is clean. Fill bottle with fluid. Adjust to approx­imately (1 ounce to 8 gallons water) 1 part per thousand 'use dilution'. Cycle machine and run dishes through. Check drainage. Adjust until no water breaks appear on dishes. An "orange I peel" pattern from water drying off of dishes is best.  Hydraulic and Electric Rinse Pumps-insert feed tube into shipping container and cycle rinse to prime or it pump has prime switch activate to prime. Adjust metering value or pump stroke to deliver (1 ounce to 8 gallons water)  1 part per thousand 'use dilution'. Cycle machine and run dishes through. Check drainage. Ad­just until no water breaks ap­pear on dishes. Note:  For best results, rinse water should always be be­tween 180°F-190°F. Also if proper rinsing and drying is not achieved, check rinse nozzles for correct pattern and quantity of rinse</p>
<p>
 </p>
<p style="text-align: justify">
<strong>CAR WASH RINSE ADDITIVE:</strong>  Add to rinse water at the rate of 1 to 2 ounces per 8 to 12 gallons of water.  Adjust to proper sheeting action.  Car will air dry without spots including windows.  </p>