Tankclean ECO
Non-caustic tank cleaner for Mineral, Petroleium products, veg oil, animal oil, fats etc.
Designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid
Key details
| Generic name | Non-caustic tank cleaner for Mineral, Petroleium products, veg oil, animal oil, fats etc. |
|---|---|
| Active matter (%) | 72-75 |
| Standard packing | 210.00 Ltr. |
| Available pack sizes | 20, 25, 50, 210 Ltrs packing. Non-caustic Biodegradable tank cleaner for cleaning of Mineral, Petroleium products, veg oil, animal oil, fats etc. |
| Supply locations | Tank clean ECO supplier in Mumbai, Nhava Seva, Surat - Hazira, Kandla - Deen Dayal Port, Mundra, Sikka, Jamnagara, Hazira, Gandhidham, Manglore, Goa, Visakhapatnam - Gangavaram, Chennai - Ennore, Kolkata - Haldia - Buz Buj, Paradip. We are also one of largest tanclean ECO supplier in Fujairah, Dubai, Sharjah, Abu Dhabi - Middle East, UAE, Sohar, Muscat Oman |
Need this product at your port or plant?
Enquire Now
RXSOL Tankclean Eco is designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.
Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.
Pre wash :-
Before cleaning with RXSOL Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending on the type of cargo.
Recirculation method ::: Refer Below.
Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.
Properties:
Specific gravity (at 20°C) : 1.05
Flash point (10%) : Non Flammable
pH (10%) : 12.0 - 12.5
Colour : Clear
Odour : citrus
During Tank Cleaning operation, Re-circulation method can be considered one of POPULAR METHOD. TIPS for uses of TANK CLEAN ECO.
1. First of all remove and strip all residue manually from Tank bottom and wall, Then flush tanks with the copious amount of seawater if possible by using the high-pressure machine to remove remaining cargo to slop. (As per MARPOL 78/73)
2. Then recirculate hot water inside the tanks at least for 2-10 hr, this will helps to remove oily-mud and residues in the coating/steel.
3. Then again take fresh hot water inside the tank and use Tank Clean ECO 0.5 - 2 %. And continue recirculation 2-8 hr. And continuously try to maintain temperature of 60 - 65 Degree Centigrade. Hot recirculation will improve the cleaning result. Do not overheat, as this may burn the cargo. otherwise, The water is heated by means of the heating coils, cargo heat exchanger or Butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on the type of cargo).
4. Again Flush entire tanks with a large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.
5. Flush tanks with freshwater to remove salts, mop and dry.
RXSOL TANK Clean ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.
Description
Tank Cleaner Eco is “the strongest there is” water-based, non-caustic cleaning and degreasing agent. It is based on
the latest and most powerful biodegradable surface-active and emulsifying agents. It contains fatty alcohol ethoxylates metasilicates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal
for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning
chemicals have reduced effect with seawater.
Product benefits, Application & Features:
• Non-Flammable • Suitable in sea & fresh water
• Leaves no film in the cargo tanks • Biodegradable
• Easy to apply. Effective and economical in use • Contains no ethoxylated nonylphenol (NF)
Related products
From our blog
Need Tankclean ECO for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote