Flocculant Cationic Polymer DAF
Flocculating Agents B
Key details
| Active matter (%) | 81-90 |
|---|---|
| Standard packing | 25.00 Kg.PWD |
| Supply locations | Flocculant Cationic Polymer DAF manufacturer and supplier in India, UAE Gulf, Oman, Nairobi Kenya. Flocculant Cationic Polymer DAF available andready stock supplier Fujairah, Abudhabi, Ajman, Dubai, Sharjah, Ruwi, Barka, Sohar, Muscat Oman, Sudan, Yemen |
Need this product at your port or plant?
Enquire Now<p style="text-align: justify;">
<span style="text-align: justify;">International environmental regulations set strict rules as to the oil content in effluent water from ships. To meet these regulations, a combination of mechanical and chemical cleaning is necessary. Rxsol Flocculant is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Rxsol </span>Flocculant<span style="text-align: justify;"> breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.</span></p>
<p style="text-align: justify;">
<strong style="text-align: justify;">Dosing method : </strong><br style="text-align: justify;" />
<br style="text-align: justify;" />
<span style="text-align: justify;">Typical dose rate: 100 - 500ppm (0.1 - 0.5 litre/m3 of water)</span><br style="text-align: justify;" />
<br style="text-align: justify;" />
<span style="text-align: justify;">In a multistage bilge water cleaning system, RXSOL </span>Flocculant<span style="text-align: justify;"> is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it.The feed is adjusted in connection with the installation and normally needs no alteration. If required, dosing can also be controlled by measuring the level in the container.</span></p>
<p>
</p>
<div id="cke_pastebin">
<table border="0" cellpadding="1" cellspacing="1">
<tbody>
<tr>
<td>
Form </td>
<td>
Liquid</td>
</tr>
<tr>
<td>
Colour</td>
<td>
Colourless</td>
</tr>
<tr>
<td>
Odour</td>
<td>
Odourless</td>
</tr>
<tr>
<td>
pH</td>
<td>
1 -2</td>
</tr>
<tr>
<td>
Melting Point</td>
<td>
-25 °C / -13 °F</td>
</tr>
<tr>
<td>
Boiling Point</td>
<td>
100 - 120 °C</td>
</tr>
<tr>
<td>
Secific Gravity</td>
<td>
1.15 - 1.25</td>
</tr>
<tr>
<td>
Solubility in Water</td>
<td>
Micible<br />
</td>
</tr>
</tbody>
</table>
</div>
<p>
<strong>Features & Benefit : </strong></p>
<ul>
<li>
Cost-effective bilge water treatment based on specially selected Polymer</li>
<li>
Iron-free. Completely safe to the environment</li>
<li>
Acts by both breaking the oil-in-water emulsion and by building flocs</li>
<li>
Remaining oil sludge can be burned onboard or pumped ashore-contains very little water</li>
<li>
Helps to meet environmental regulations on oil content. Discharged water contains normally less than 3 ppm oil</li>
<li>
Low dosage, economical use</li>
<li>
Effective over an extended pH-range. Eliminates the use of pH-stabilising chemicals</li>
</ul>
<p>
<strong>Handling and Storage :</strong></p>
<p style="text-align: justify;">
Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area.<br />
Store in original containers. Keep containers securely sealed. Store in a cool, dry, well-ventilated area.</p>
Related products
From our blog
Need Flocculant Cationic Polymer DAF for your operation?
Our team helps with product selection, dosage, safety data and delivery worldwide.
Request a Quote