Ship Hold Cleaner ACQUA Tuff High Foam CLEANER

Express Port Supply: 2-4 Hr Berth Delivery Across Major Indian & UAE Ports

ISO 9001:2015 Certified QA

IMPA / ISSA Marine Standard

Ready Stock 25L, 210L, IBC

Ship Hold Cleaner

ACQUA Tuff High Foam CLEANER

Part No. RXSOL-22-3033-210

ALKAATUFF high foam cleaner detergent for ship hold cleaning

Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah

Key Technical Details

Part number	RXSOL-22-3033-210
Generic name	ALKAATUFF high foam cleaner detergent for ship hold cleaning
Active matter (%)	45-50
Standard packing	220.00
Available pack sizes	20, 25, 50, 210, 1000 Ltr IBC TANK. We are keeping a full range of ship hold cleaning chemicals which include sodium hypochlorite, Muriatic, Metal clean bright, Cement remover, Coal remover, Pet coke stain remover, Hold Block Slip polymer Barrier coat, and many more. We are one of the largest suppliers of hold cleaning chemicals in India and the Middle East.
Supply locations	ALKAATuff High Foam CLEANER supplier in Mumbai, Nhava Seva, Pirpav, Surat - Hazira, Kandla - Gandhidham, Sikka - Mundra, Manglore - Goa, Vizag - Visakhapatnam, Gangavaram, Kakinada, Chennai - Ennore, Kolkata, Haldia, Paradip, Buj buj, Dubai - Sharjah, Fujairah Middle East

Request a Quote All Products

Application

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds ALKAATuff High Foam CLEANER plays very important role in washing down with use of chemicals. ALKAATuff High Foam CLEANER classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Using Procedure

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using ALKAATUFF High Foam CLEANER incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1: Spraying the ALKAATuff High Foam CLEANER over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.

After the ALKAATuff High Foam CLEANER has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the ALKAATUFF High Foam CLEANER thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of ALKAATuff High Foam CLEANER substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of ALKAATUFF High Foam CLEANER in correct dosages is half the job done.

General Cleaning :- ALKAATuff High Foam CLEANER can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination ALKAATuff High Foam CLEANER should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of ALKAATUFF High Foam CLEANER to a bucket of water. The ALKAATuff High Foam CLEANER solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the ALKAATuff High Foam CLEANER solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, ALKAATuff High Foam CLEANER is not recommended for washing machines.

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

Technical Specifications

Tips for Hold cleaning - Prior to high pressure hold washing, excess cargo residue on the tank top should be removed by hand sweeping and lifted out of the holds via the use of a portable mucking winch. After all excessive cargo residue has been removed then the holds can be washed with salt water using a highpressure hold cleaning gun, supplemented by the deck air line to provide increased pressure. This is the most commonly used method of hold cleaning. Then use ALKAATUFF High Foam CLEANER hold cleaning Marine Chemicals. Cleaning Chemicals; Cargo Hold Cleaning detergent to get optimum result.

Remarks

Hold Cleaning Preparation and Method :

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges :

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Note

ALKAATUFF High Foam CLEANER is absolutely free along with the purchase of Slip Barrier Coat - Hold block materials. ALKAATUFF High foam Free 1000 Ltr against 1000 Ltrs purchase of Slip Barrier Coat Plus at our Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf.

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Product FAQs

Need ACQUA Tuff High Foam CLEANER for your operation?

Our team helps with product selection, dosage, safety data and delivery worldwide.

Request a Quote

Marine & industrial chemicals, delivered worldwide.

Get in Touch

Learn More

Enquiries

ACQUA Tuff High Foam CLEANER